Monday, March 3, 2014

INTRODUCTION TO  DC CIRCUITS
 
first we emulated the battery, the cables, and the load with lab equipment
 
Battery= bench power box
cables= resistance box
load= resistance
 
 
this is the process to obtain the value of  R-load
 
the measured value is 989 ohms
 
the measured resistance of the box which will act as the R cable is 100.8 ohms
the measured value for V-load is 10.99 V
the current in the circuit provided by the power supply is 11.14 mA
 
 
 
Here is the calculation for the time of discharge
also the calculation of the power efficiency
power lost (power of the cable) 
 power out(power of the load)
 
 
 
 
 
 
 
 
Calculation for power efficiency
calculation for max distance of the cable
 
 
max distance is 298.08/2= 146.04meters
the value obtained has to be divided by two because there is two cables connected.
 
 
In conclusion the experiment is a good modeling for the real situation. with this experiment we get a sense of the power that is being distributed (power lost, power out).We also get a sense of how long our cable has to be.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

No comments:

Post a Comment