Monday, June 9, 2014

Bandwith and frequency

I this lab we will investigate a simple wave receiver. We will analyze the bandwidth and the quality factor
here is a picture of the circuit built
 
 
here are the calculations
on the right side we have the theoretical calculations and in the left we have the measured values.

we have seen that as we increase the frequency our current will decrease. and as we increase the resistance in the circuit the quality factor decreases
 

Frequency Response and filters

Objective
to verify the reaction of high and low pas filters
we will build a simple circuit using 1k resistor and 1 micro Farad Capacitor
Here is the circuit
 

 
 
Here are the calculation for the low pass filter
Notice that the voltage is taken off the capacitor
 
 
 

 
 
Here are the calculations for the high pass filter
Notice that the voltage is taken from the Resistor
 



 
 
After the experiment we found out that the filters actually filter voltages. high pass removes the low frequency voltage and the low pass filter removes the high frequency filters.